EAN: 6974662350336

AnyCubic Wash &Cure 3 print cleaning and drying device.

Take care of the proper finishing and curing of your 3D prints. The AnyCubic Wash &Cure 3 washing and drying device features an enlarged design that makes it great for models of different sizes. It allows cleaning both in a basket and with a platform. In doing so, it works surprisingly quietly and offers several operating modes to choose from. You can also manually adjust the cleaning and curing times.

assets.innpro.pl"/>

It even accommodates larger prints

The capacity of the device's basket is 3 l, and the total capacity of its cleaning module is as much as 4 l. Thus, with its help you can easily clean prints up to 165 x 100 x 180 mm (in the basket) or up to 165 x 100 x 165 mm (with the platform). On the other hand, the dimensions of the curing space are 160 x 180 mm.

assets.innpro.pl"/>

Ideal for curing

The device is distinguished by its carefully thought-out design and optimized arrangement of LEDs to ensure comprehensive, even curing of models. You will also find in the set an additional UV lamp with a bendable design, which is distinguished by an energy level of 30,000 μW/cm2 and a radiation range from 1 cm to 3 cm. With its help you will successfully cure, for example, selected details of prints.

assets.innpro.pl"/>

Improved design, higher efficiency

The device's basket was made of rust-resistant double-layer PP plastic, and thanks to its improved design, it allows you to clean prints placed on the platform. It also allows you to choose from 2 heights - 100 mm and 165 mm. So you can adjust it to the size of your model to optimize IPA consumption.

assets.innpro.pl"/>

Convenient operation

The device allows you to choose from 3 modes of operation, such as washing, curing and FlexiCure enhanced curing using the included UV lamp. You can also adjust the cleaning and drying time from 1 minute to 30 minutes. The Wash &Cure 3 model is operated with a convenient-to-use dial and touch-sensitive buttons.

assets.innpro.pl"/>

Low noise level

Don't be afraid of annoying noise. The Wash &Cure 3 model features a sealed design and optimized software, so it can deliver exceptional performance while keeping the noise level low - only about 65 dB. Relax or get on with your work while the device washes and cures your prints - nothing will disturb you.

assets.innpro.pl"/>

Included

Print washing and drying unitCleaning moduleCleaning basketStick x4Curing tableUV lamp with bendable designAllen wrench setPower supplyUser manual